Metzenbaum-Fino Operating Scissors T/C Insert S/S Str

Metzenbaum-Fino Operating Scissors T/C Insert S/S Str

The Metzenbaum-Fino Operating Scissors T/C Insert S/S Str. is available in four lengths: 14.5 cm, 18 cm, 20 cm, and 23 cm, carrying straight blades with sharp-pointed tips on both blade ends in a slender, fine-pattern build. The Fino designation identifies this as the lighter, more delicate Metzenbaum variant, with a long shank-to-blade ratio that keeps proportionally short blades on extended shanks, concentrating cutting force at the fine tip while maintaining handle clearance above the wound. Tungsten carbide inserts provide the sharpest and most durable cutting edge available, and a non-glare satin finish reduces reflective glare under operating lights. Gold-colored dual ring handles identify TC fitting.

The straight blade path drives undeflected axial cutting force along flat tissue planes, suited for surfaces where curved blades would over-angle the fine tips off the incision line. FINO scissors, straight, sh/sh, 14.5 cm (5½”), Tungsten instruments in the slender pattern reach deep wound fields through narrow tissue openings while cutting cleanly along flat peritoneal and organ surfaces.

FINO scissors, straight, sh/sh, 23 cm (9″), Tungsten Carbide instruments are widely used for cutting and dissecting delicate tissues in plastic surgery, cardiovascular, neurosurgery, and general surgery. General surgeons use the Metzenbaum-Fino Operating Scissors T/C Insert S/S Str. for straight-line peritoneal incision extension and mesenteric tissue trimming during bowel resection. Cardiovascular surgeons reach for the 20 cm and 23 cm variants for pericardial incision and mediastinal tissue division where flat straight-line cuts are needed at depth. Plastic surgeons select this instrument for precise subcutaneous tissue trimming along straight flap margins during reconstructive procedures.

Leader Surgical builds the Metzenbaum-Fino series to the same TC bonding standard across all four lengths, so surgeons moving between the 14.5 cm and 23 cm variants on the same case get identical blade sharpness and tip geometry without performance variation.

What is the benefit of T/C inserts over standard stainless steel?
Tungsten Carbide is significantly harder than stainless steel. These inserts stay sharp up to 30 times longer, provide a smoother cut, and require less frequent professional sharpening.